OPPO Enco Buds3 Pro Specifications

OPPO
Enco Buds3 Pro

Up to 54 Hours of Playback

Hyper Durable Battery

12.4mm Extra Large Driver

IP55 Dust and Water Resistance

Bluetooth® 5.4 Low Latency Transmission

Enco Master with Personalized Equalizer

Glaze White

* The above image is for reference only. Please refer to the actual product for all criteria.

Earphone

Model: ETEK1 Charging case model: ETEK1

Audio Quality

Driver: φ12.4mm Dynamic Driver Driver sensitivity: 114 ± 3dB@1KHz Frequency response range: 20~20KHz Microphone sensitivity: -38dBV/Pa

Bluetooth®

Bluetooth® codec: AAC/SBC Bluetooth® version: Bluetooth® 5.4 Bluetooth® range: 10m

Battery Life

Battery type: Rechargeable Li-ion Cell Battery capacity: 58mAh (earbuds)/560mAh (charging case) Music play time (AAC, Default setting, 50% volume)*: 12h (single charge)/54h (with charging case) * The above specifications were obtained based on tests performed in OPPO laboratories. Charging times were tested in OPPO laboratories at a temperature of 25°C using an OPPO standard charger. The actual results may differ slightly depending on environmental factors and the charger used.

Charging

ASAP Charging Time: 10 mins for 4h (single charge)/8h (with charging case) Charging time: about 60 mins (earbuds)/120 mins (earbuds + charging case) Charging input (charging case): 5V ⎓ 0.9A Charging input (earbuds): 5V ⎓ 0.17A Charging output (charging case to earbuds): 5V ⎓ 0.35A Charging Port: Type-C * The above specifications were obtained based on tests performed in OPPO laboratories. Charging times were tested in OPPO laboratories at a temperature of 25°C using an OPPO standard charger. The actual results may differ slightly depending on environmental factors and the charger used.

Water and dust resistance

Water resistance (earbuds): IP55

Size

Weight (earbud): 4.3g ± 0.2g Weight (earbuds + charging case): 42.7g ± 2g Size (earbud): 31.09mm * 20.28mm * 23.29mm Size (charging case): 59.20mm * 24.00mm * 47.50mm