Co-created with Dynaudio | ระบบเสียง coaxial dual-driver system รุ่นที่ 2 | LHDC 4.0 ultra-HD
transmission | Ultra-wide frequency active noise cancellation | Bone conduction microphone
Compared with traditional AAC transmission protocol(256Kbps), LHDC4.0 ultra-HD transmission
protocol(900Kbps) has a three times higher bitrate than the former. LHDC transmission should be
built via Bluetooth® connection between two LHDC-supported devices.
To use the golden sound feature, you need to complete a test on your phone. OPPO ColorOS 11.0 or
later phone users can set this feature in "Bluetooth - OPPO Enco X2 - Earbud functions". Users
with Android 6.0 or later or iOS models can download and install the HeyMelody app to configure
the earbuds.
The data comes from OPPO’s Laboratory.
According to OPPO Laboratory, OPPO Enco X2's noise cancellation chip is 50% more powerful than
the Enco X's.
The noise cancellation data is based on real-life tests, and the ANC technology is sourced from
OPPO Laboratory. The actual results will vary depending on the user's ear size, ear canal
structure, ear tips used, wearing method, workout state, and other conditions.
Bluetooth® 5.2 binaural low-latency transmission works with any phone SoC.
The Bluetooth connectivity was tested in a strong interference environment. Both with LHDC on,
the Enco X2's Bluetooth connection is on average three times more stable than the Enco X's.
The 94 ms low latency was tested in OPPO Laboratory with the Enco X2 and OPPO Find X3 Pro, where
"94 ms" is the time from when an on-screen button is tapped until the earbuds receive the sound.
The weight of a single earbud was measured in OPPO Laboratory and may vary depending on the
measurement method.
The earbuds are 99.9% bacteria-free, which has been tested by professional institutions (Report
No.: WJ20210206–WJ20213052).
OPPO Enco X2 supports binaural recording with OPPO Find X5 Pro and OPPO Find X5. For other phone
models, please refer to further OTA updates.
The charging time and battery life were tested in OPPO Laboratory at a temperature of 25°C using
a standard OPPO charger. The actual results may differ slightly based on environmental factors
and the charger used.
You can use a Qi-compatible wireless charger to charge the case with the nameplate facing up.
You can also charge the case using a phone that supports reverse wireless charging.
The earbuds support IP54 dust and water resistance, but the charging case is not. Avoid using
the earbuds and charging case during strenuous exercise to prevent damage from perspiration.
OPPO Enco X2 supports dual connectivity with OPPO ColorOS 11.0 and later phones. To enable this
feature, go to "Bluetooth - OPPO Enco X2 - Earbud functions". Users with Android 6.0 or later or
iOS models can download and install the HeyMelody app to configure the earbuds. The dual
connection performance may vary depending on the connected devices, and it may take longer to
switch to a laptop.
* The above product details are for reference only. Some specifications and descriptions may change for
reasons including but not limited to supplier replacement. Please refer to the actual product for all
criteria.